diff --git a/Soile_Moisture_Sensor_Arduino_MEGA-16_Sensors.ino b/Soile_Moisture_Sensor_Arduino_MEGA-16_Sensors.ino
new file mode 100644
index 0000000..0864f4f
--- /dev/null
+++ b/Soile_Moisture_Sensor_Arduino_MEGA-16_Sensors.ino
@@ -0,0 +1,239 @@
+// For Mega you can add al of the commands and uncomment. For nano you will need to comment
+// out some of the script.
+
+//// pump digital pins,  16 digital pins  but grove only seems to have the 
+//// split mapped diferent on the split cables. So only using 8.
+//const int pumpPin0 = 0;
+//const int pumpPin1 = 1;
+//const int pumpPin2 = 2;
+//const int pumpPin3 = 3;
+//const int pumpPin4 = 4;
+//const int pumpPin5 = 5;
+//const int pumpPin6 = 6;
+//const int pumpPin7 = 7;
+
+// soil moisture analog pins, 16 analog pins but grove only seems to have the 
+// split mapped diferent on the split cables. So only using 8.
+const int soilSensorA0 = A0;
+const int soilSensorA1 = A2;
+const int soilSensorA2 = A4;
+const int soilSensorA3 = A6;
+const int soilSensorA4 = A8;
+const int soilSensorA5 = A10;
+const int soilSensorA6 = A12;
+const int soilSensorA7 = A14;
+
+// soil moisture reading that is dry
+const int dry = 680;
+// soil moisture reading that is moist
+const int moist = 680;
+// print delay
+const int printDelay = 5000;
+// per sensor script delay
+//const int sensorsDelay = 5000;
+// Serial write speak
+const int serialWrite = 19200;
+
+// site number if you have more than one
+const int siteNumber = 1;
+// Cycle Delay every 2 hours
+//const int cycleDelay = 7200000;
+// water delay
+//const in waterDelay = 10000;
+
+void setup() {
+//  pinMode(pumpPin1, OUTPUT);
+//  pinMode(soilSensor0, INPUT);
+//  Serial.begin(serialwrite);
+//  digitalWrite(pumpPin1, HIGH);
+//  delay(sensordelay);
+//  pinMode(pumpPin1, OUTPUT);
+//  pinMode(soilSensor1, INPUT);
+//  Serial.begin(serialwrite);
+//  digitalWrite(pumpPin2, HIGH);
+//  delay(sensordelay);
+//  pinMode(pumpPin2, OUTPUT);
+//  pinMode(soilSensor2, INPUT);
+//  Serial.begin(serialwrite);
+//  digitalWrite(pumpPin3, HIGH);
+//  delay(sensordelay);
+//  pinMode(pumpPin3, OUTPUT);
+//  pinMode(soilSensor3, INPUT);
+//  Serial.begin(serialwrite);
+//  digitalWrite(pumpPin4, HIGH);
+//  delay(sensordelay);
+//  pinMode(pumpPin4, OUTPUT);
+//  pinMode(soilSensor4, INPUT);
+//  Serial.begin(serialwrite);
+//  digitalWrite(pumpPin5, HIGH);
+//  delay(sensordelay);
+//  pinMode(pumpPin5, OUTPUT);
+//  pinMode(soilSensor5, INPUT);
+//  Serial.begin(serialwrite);
+//  digitalWrite(pumpPin6, HIGH);
+//  delay(sensordelay);
+//  pinMode(pumpPin6, OUTPUT);
+//  pinMode(soilSensor6, INPUT);
+//  Serial.begin(serialwrite);
+//  digitalWrite(pumpPin6, HIGH);
+//  delay(sensordelay);
+//  pinMode(pumpPin7, OUTPUT);
+//  pinMode(soilSensor7, INPUT);
+//  Serial.begin(serialwrite);
+//  digitalWrite(pumpPin7, HIGH);
+//  delay(sensordelay);
+  Serial.begin(serialWrite);
+}
+
+void loop() {
+
+  // Delay to allow any reboots to happen
+  delay(120000);
+  
+  Serial.println("Sensing Moisture on Zone " + String(siteNumber) + "!");
+  delay(printDelay);
+
+  // Moisture Sensor A0
+  int moisture0 = analogRead(soilSensorA0);
+  Serial.println("Pot 1: " + String(moisture0));
+  delay(5000);
+
+  if (moisture0 >= dry) {
+     // the soil is too dry, water!
+    Serial.println("Pot 1 is dry");
+  delay(5000);
+  }
+
+    if (moisture0 <= moist) {
+     // the soil is too dry, water!
+    Serial.println("Pot 1 is moist");
+  delay(5000);
+  }
+  
+  // Moisture Sensor A2
+  int moisture1 = analogRead(soilSensorA1);
+  Serial.println("Pot 2: " + String(moisture1));  
+  delay(5000);
+  
+  if (moisture1 >= dry) {
+     // the soil is too dry, water!
+    Serial.println("Pot 2 is dry");
+  delay(5000);
+  }
+
+    if (moisture1 <= moist) {
+     // the soil is too dry, water!
+    Serial.println("Pot 2 is moist");
+  delay(5000);
+  }
+    
+  // Moisture Sensor A4
+  int moisture2 = analogRead(soilSensorA2);
+  Serial.println("Pot 3: " + String(moisture2)); 
+  delay(5000);
+  
+  if (moisture2 >= dry) {
+     // the soil is too dry, water!
+    Serial.println("Pot 3 is dry");
+  delay(5000);
+  }
+
+    if (moisture2 <= moist) {
+     // the soil is too dry, water!
+    Serial.println("Pot 3 is moist");
+  delay(5000);
+  }
+  
+  // Moisture Sensor A6
+  int moisture3 = analogRead(soilSensorA3);
+  Serial.println("Pot 4: " + String(moisture3)); 
+  delay(5000);
+  
+  if (moisture3 >= dry) {
+     // the soil is too dry, water!
+    Serial.println("Pot 4 is dry");
+  delay(5000);
+  }
+
+    if (moisture3 <= moist) {
+     // the soil is too dry, water!
+    Serial.println("Pot 4 is moist");
+  delay(5000);
+  }
+    
+  // Moisture Sensor A8
+  int moisture4 = analogRead(soilSensorA4);
+  Serial.println("Pot 5: " + String(moisture4));
+  delay(5000);
+  
+  if (moisture4 >= dry) {
+     // the soil is too dry, water!
+    Serial.println("Pot 5 is dry");
+  delay(5000);
+  }
+
+    if (moisture4 <= moist) {
+     // the soil is too dry, water!
+    Serial.println("Pot 5 is moist");
+  delay(5000);
+  }
+  
+  // Moisture Sensor A10
+  int moisture5 = analogRead(soilSensorA5);
+  Serial.println("Pot 6: " + String(moisture5));
+  delay(5000);
+   
+  if (moisture5 >= dry) {
+     // the soil is too dry, water!
+    Serial.println("Pot 6 is dry");
+  delay(5000);
+  }
+
+    if (moisture5 <= moist) {
+     // the soil is too dry, water!
+    Serial.println("Pot 6 is moist");
+  delay(5000);
+  }
+     
+  // Moisture Sensor A11
+  int moisture6 = analogRead(soilSensorA6);
+  Serial.println("Pot 7: " + String(moisture6));
+  delay(5000);
+  
+  if (moisture6 >= dry) {
+     // the soil is too dry, water!
+    Serial.println("Pot 7 is dry");
+  delay(5000);
+  }
+
+    if (moisture6 <= moist) {
+     // the soil is too dry, water!
+    Serial.println("Pot 7 is moist");
+  delay(5000);
+  }
+  
+  // Moisture Sensor A12
+  int moisture7 = analogRead(soilSensorA7);
+  Serial.println("Pot 8: " + String(moisture7));
+  delay(5000);
+  
+  if (moisture7 >= dry) {
+     // the soil is too dry, water!
+    Serial.println("Pot 8 is dry");
+  delay(5000);
+  }
+
+    if (moisture7 <= moist) {
+     // the soil is too dry, water!
+    Serial.println("Pot 8 is moist");
+  delay(5000);
+  }
+  
+  Serial.println("Done Sensing Moisture!");
+  delay(5000);
+  
+  Serial.println("Next moisture check is in a couple hrs!");
+  delay(printDelay);
+  
+  delay(3600000);
+}